Quilter's Inc. Handi-Handles, Inc.
N821 Oak Road
Sheldon, WI 54766
1-715-452-5855 info
1-866-837-8329 order line
info@handihandles.com
Handi-Handles Lasers Handi-Control Front Mount
Stipplers
Inc. Handi-Front
Mount Frame Handi-Front Mount Frame
Shown on a Handi-Quilter quilting frame with 2 Handi-handles,
a Handi-Laser stylus and a Juki sewing machine.
     The Handi-Front mount frame allows you to quilt from either the back or  the needle side of your quilting frame. The back side is great for doing your favorite  pantagram designs. Quilting from the front side gives you the ultimate view  and control for doing custom and free motion quilting.
     This sturdy, yet light-weight frame, simply attaches to the top carriage of your quilting frame.
     No tools are needed when you move the Handi-Handles from the back to the needle side.  You simply loosen the wing nuts that are on the back of the Handi-Handles. Then slide the Handi-Handles into the slots on the side you want to quilt from   and retighten the wing nuts. There are 3 mounting positions, left, right , and center, on each side of of the Front Mount Frame.
     The frame comes fully assembled and is ready to be mounted on your quilting frame. Complete mounting instructions are included with the Handi-Front mount frame.
     For most sewing machines an extension wire is needed to move the handles to the needle side of the frame. Duel input extension wires are available to hook up 2 Handi-Handles to one machine. If ordered together,  these wires are attached to the frame at our factory.
     As shown below  Handi-Handles may be mounted "upside down" to make them easier to reach.

Above: The Handi-Front mount bracket is attached to the Handi Quilter. The picture on the right shows the Handi-Front mount frame with two Handi-Handles on it. While this is not needed, some people prefer this  if they will be switching back and forth frequently. The picture on the left shows how the frame is attached to the top carriage. A stabilizing screw is included and may be used if needed.
Below:  The Handi-Front mount frame is on a Super Quilter. The frame simply snaps onto the top carriage of the quilt frame.

The pictures on the left show how the frame is mounted onto a Grace Machine Quilter. The pictures on the right show the frame mounted on a Quilt Easy Carriage. This frame can also  be used for other solid surface quilt frames. Information you will need to order:
The type of quilting frame you own:
     € Handi Quilter.
     € Super Quilter.
     € Grace Machine Quilter.
     € Quilt Easy
     € Pennywinkle
     € Hinterberg
        Other Quilt frame__________________.
Which sewing machine will you be using with this frame:
     € Machine manufacturer: __________________.
     € Machine Model Number: _________________.
(Used to determine which extension wire is needed.)
Do you Want one set of handles or two
     € One.
     € Two.
     If  using 2 Handi-Handles, Do you want  the duel input extension wire?
Home
Back Next